Top 10 Questions for Choker Setter Interview

1. What is the difference between a half-hitched choker and a running choker?

• A half-hitched choker is a loop of wire rope that is passed around the load and then passed through itself to form a knot.
• A running choker is a loop of wire rope that is passed around the load and then passed through a choke hook.

2. What is the best way to calculate the safe working load of a choker sling?

The safe working load of a choker sling is determined by the size and grade of the wire rope used, as well as the number of wraps in the choker.

Formula

• SWL = (Breaking Strength / Safety Factor) x (Number of Wraps)

3. What precautions should be taken when using a choker sling?

• The sling should be inspected before each use.
• The load should be properly balanced.
• The sling should be protected from sharp edges.

4. What are the different types of wire rope used for choker slings?

There are several different types of wire rope used for choker slings, including:

• Six-strand wire rope
• Eight-strand wire rope
• Braided wire rope

5. What is the difference between a ferrule and a socket?

A ferrule is a metal cylinder that is swaged onto the end of a wire rope to prevent the rope from fraying.

A socket is a metal fitting that is attached to the end of a wire rope to provide a connection point for a hook or other rigging hardware.

6. What is the proper way to store a choker sling?

• The sling should be stored in a dry place.
• The sling should be protected from sharp edges.
• The sling should be inspected before each use.

7. What are the different hand signals used for choker setters?

There are several different hand signals used for choker setters, including:

Grab the Rope

• Make a fist with one hand and point your index finger towards the ground.

Raise the Hook

• Extend your fist straight out in front of you with your thumb pointing up.

8. What are the dangers of using a choker sling improperly?

Using a choker sling improperly can be dangerous and can lead to serious injuries or even death.

• The sling could break and the load could fall.
• The sling could become entangled in the load.
• The choker could slip and the load could fall.

9. What are the different types of chokers used in logging?

There are several different types of chokers used in logging, including:

• Half-hitched chokers
• Running chokers
• Gun chokers

10. What are the different methods used to hook a choker onto a log?

There are several different methods used to hook a choker onto a log, including:

• Using a peavey
• Using a cant hook
• Using a choker hook

Choker Setters are responsible for attaching chokers (steel cables or chains with hooks) to logs and securing them to logging trucks. They play a crucial role in the efficient and safe transportation of logs from the forest to processing facilities.

1. Attaching Chokers to Logs

Choker Setters use a variety of tools and techniques to attach chokers to logs. They may use choker hooks, tongs, or other specialized equipment to secure the chokers around the logs. They must ensure that the chokers are properly tightened and positioned to prevent the logs from shifting or falling during transportation.

2. Inspecting Equipment

Choker Setters are responsible for inspecting their equipment regularly to ensure it is in good working order. They check for any damage or wear and tear that could compromise the safety or efficiency of their operations. They also maintain and repair their equipment as needed.

3. Operating Logging Equipment

Choker Setters may operate a variety of logging equipment, such as skidders, yarders, or loaders, to assist in the transportation of logs. They use these machines to move logs from the felling site to the landing area, where they are loaded onto trucks.

4. Maintaining a Safe Work Environment

Choker Setters work in a potentially hazardous environment, so they must take precautions to ensure their safety and the safety of their coworkers. They wear appropriate personal protective equipment (PPE) and follow established safety procedures to minimize the risk of accidents.

Preparing for a job interview is essential to make a good impression and increase your chances of getting the job. Here are some tips to help you prepare for a Choker Setter interview:

1. Research the Company and Position

Before the interview, take some time to research the company you are applying to and the specific Choker Setter position. This will help you understand the company’s culture, values, and the specific requirements of the role.

2. Practice Answering Common Interview Questions

There are certain questions that are commonly asked in Choker Setter interviews. Practice answering these questions in advance so that you can feel confident and prepared during the interview. Some common questions include:

• Tell me about your experience as a Choker Setter.
• What are your safety procedures when working with heavy equipment?
• How do you handle working in a team environment?
• What are your career goals?

3. Highlight Your Skills and Experience

During the interview, be sure to highlight your skills and experience that are relevant to the Choker Setter position. Focus on your ability to operate logging equipment, attach chokers to logs, and maintain a safe work environment. You can also mention any certifications or training you have that would make you a valuable asset to the company.

4. Ask Questions

At the end of the interview, be sure to ask the interviewer questions about the company and the position. This shows that you are interested in the job and that you are taking the interview seriously. Some good questions to ask include:

• What are the biggest challenges facing the Choker Setter team?
• What are the opportunities for advancement within the company?
• What is the company’s safety record?