Top 10 Questions for Tree Feller Interview

1. What are the key safety considerations when felling trees?

The following are the key safety considerations when felling trees:

• Always wear proper personal protective equipment (PPE), including a hard hat, safety glasses, gloves, and chaps.
• Assess the tree and the surrounding area for hazards, such as power lines, buildings, and other trees.
• Plan your escape route in case the tree falls in an unexpected direction.
• Make sure there are no people or animals in the area where the tree will fall.
• Use a sharp chainsaw and keep it in good working condition.
• Follow the manufacturer’s instructions for operating the chainsaw.

2. How do you determine the direction of a tree’s fall?

Factors to Consider

• Lean of the tree
• Wind direction and speed
• Weight distribution of the tree
• Natural defects or decay in the tree

Method

• Use a plumb bob or inclinometer to measure the tree’s lean.
• Observe the direction of the wind and estimate its speed.
• Look for any branches or other indicators that suggest the tree is leaning in a particular direction.
• Tap the tree with a hammer or axe to listen for any hollow sounds that may indicate decay.

3. What are the different types of felling cuts and when are they used?

The three main types of felling cuts are:

• Undercut: A wedge-shaped cut made on the side of the tree opposite the direction of fall. It helps to control the direction of the fall and prevent the tree from splitting.
• Back cut: A horizontal cut made through the trunk of the tree, parallel to the undercut. It severs the remaining wood and causes the tree to fall.
• Hinge cut: A variation of the back cut that leaves a small strip of wood uncut on the side of the tree opposite the direction of fall. It helps to control the speed of the fall and prevent the tree from bouncing or rolling.

4. How do you handle large or difficult trees?

Handling large or difficult trees requires special techniques and equipment, such as:

• Felling wedges: Wedges driven into the undercut to help control the direction of fall.
• Peaveys: Levers used to roll or lift trees.
• Cables and winches: Used to pull trees in a specific direction or to lower them to the ground.

5. What are the signs of a hazardous tree?

Signs of a hazardous tree include:

• Dead or dying branches
• Cracks or splits in the trunk or branches
• Leaning or tilting
• Root damage or decay
• Fungal growth or other signs of disease

6. How do you maintain and sharpen a chainsaw?

To maintain and sharpen a chainsaw, you should:

• Clean the chainsaw after each use.
• Sharpen the chain regularly using a file or grinder.
• Check the chain tension and adjust it as needed.
• Lubricate the chain and bar regularly.

7. What are the different types of tree felling equipment and their uses?

The different types of tree felling equipment include:

• Chainsaws: Portable, handheld saws used for felling and bucking trees.
• Felling axes: Heavy axes used for felling trees.
• Peaveys: Levers used to roll or lift trees.
• Cables and winches: Used to pull trees in a specific direction or to lower them to the ground.

8. How do you manage the risk of falling trees?

To manage the risk of falling trees, you should:

• Identify and assess the risk of trees in your area.
• Take steps to mitigate the risk, such as removing hazardous trees or pruning branches.
• Educate yourself and others about the risks of falling trees.

9. What are the laws and regulations governing tree felling?

The laws and regulations governing tree felling vary depending on your location. You should be aware of the laws and regulations in your area before felling any trees.

10. What are the career opportunities in tree felling?

There are a variety of career opportunities in tree felling, including:

• Tree faller: Fells trees for logging or other purposes.
• Arborist: Maintains and cares for trees.
• Forester: Manages forests and trees.
• Tree surgeon: Performs specialized tree care, such as removing hazardous branches or treating diseases.

Tree fellers, also known as arborists, are responsible for felling and removing trees in a safe and efficient manner. They typically work in teams, and their job requires them to have a good understanding of tree biology, safety procedures, and equipment operation.

1. Assessing Trees

Tree fellers must assess trees before felling them to determine the best way to remove them. This includes evaluating the tree’s size, shape, and condition, as well as the surrounding environment.

2. Felling Trees

Tree fellers use various tools and techniques to fell trees, including chainsaws, axes, and winches. They must be able to safely and efficiently remove trees without damaging property or causing injury to themselves or others.

3. Removing Debris

After a tree has been felled, tree fellers must remove the branches, leaves, and other debris. This may involve using a variety of tools, such as brush cutters, chippers, and excavators.

4. Maintaining Equipment

Tree fellers must maintain their equipment in good working order to ensure safety and efficiency. This includes regularly cleaning and inspecting tools, and replacing worn or damaged parts.

Preparing for a tree feller interview can help you make a good impression on the hiring manager and increase your chances of getting the job. Here are a few tips to help you prepare:

1. Research the Company and Position

Before the interview, take some time to research the company and the specific position you are applying for. This will help you understand the company’s culture and values, and what they are looking for in a tree feller.

2. Practice Your Answers

Once you have a good understanding of the company and the position, you can start practicing your answers to common interview questions. This will help you feel more confident and prepared during the interview.

3. Dress Professionally

Even though you will be working in a manual labor position, it is important to dress professionally for the interview. This shows the hiring manager that you are serious about the job and that you are committed to making a good impression.

4. Be Enthusiastic and Positive

Tree felling is a physically demanding job, so it is important to be enthusiastic and positive during the interview. This will show the hiring manager that you are willing to work hard and that you are excited about the opportunity to join their team.