Top 10 Questions for Wiper Interview

1. What are the different types of wipers?

Wiper systems are used to clear the windshield of rain, snow, and other debris. There are several different types of wiper systems, including: – Conventional wipers: These wipers have a single, long blade that extends across the windshield. They are the most common type of wiper system. – Beam wipers: These wipers have a single, flat blade that is attached to the windshield with a series of brackets. They are designed to provide better visibility than conventional wipers. – Hybrid wipers: These wipers combine the features of conventional and beam wipers. They have a single, long blade that is attached to the windshield with a series of brackets, but the blade is made of a flexible material that conforms to the curvature of the windshield.

2. What are the different components of a wiper system?

Wiper Motor

• The wiper motor is responsible for driving the wiper blades in a circular motion.
• The wiper motor is usually located under the dashboard of the car.

Wiper Transmission

• The wiper transmission is a system of gears and linkages that converts the rotary motion of the wiper motor into a back-and-forth motion of the wiper blades.
• The wiper transmission is usually located in the engine compartment of the car.

Wiper Blades

• The wiper blades are the part of the wiper system that actually cleans the windshield.
• Wiper blades are made of a rubber or silicone material that is designed to conform to the curvature of the windshield.

3. How does a wiper system work?

A wiper system works by using a wiper motor to drive a wiper transmission, which in turn moves the wiper blades across the windshield. The wiper blades are made of a rubber or silicone material that is designed to conform to the curvature of the windshield. As the wiper blades move across the windshield, they wipe away rain, snow, and other debris.

4. What are the symptoms of a faulty wiper system?

There are several symptoms that may indicate a faulty wiper system, including: – The wiper blades do not move when the wiper switch is turned on. – The wiper blades move slowly or erratically. – The wiper blades leave streaks or water spots on the windshield. – The wiper blades make a noise when they are in operation.

5. What are the causes of a faulty wiper system?

There are several factors that can cause a wiper system to fail, including: – A faulty wiper motor. – A faulty wiper transmission. – Faulty wiper blades. – A blown fuse. – A damaged wiring harness.

6. How do you troubleshoot a faulty wiper system?

To troubleshoot a faulty wiper system, you will need to: – Check the wiper fuse. – Check the wiring harness for any damage. – Check the wiper motor for any signs of damage. – Check the wiper transmission for any signs of damage. – Check the wiper blades for any signs of wear or damage.

7. How do you replace a wiper motor?

To replace a wiper motor, you will need to: – Disconnect the negative battery terminal. – Remove the wiper arms and blades. – Remove the wiper cowl. – Disconnect the wiper motor electrical connector. – Remove the wiper motor mounting bolts. – Install the new wiper motor. – Tighten the wiper motor mounting bolts. – Connect the wiper motor electrical connector. – Install the wiper cowl. – Install the wiper arms and blades. – Connect the negative battery terminal.

8. How do you replace a wiper transmission?

To replace a wiper transmission, you will need to: – Disconnect the negative battery terminal. – Remove the wiper arms and blades. – Remove the wiper cowl. – Disconnect the wiper transmission electrical connector. – Remove the wiper transmission mounting bolts. – Install the new wiper transmission. – Tighten the wiper transmission mounting bolts. – Connect the wiper transmission electrical connector. – Install the wiper cowl. – Install the wiper arms and blades. – Connect the negative battery terminal.

9. How do you replace wiper blades?

To replace wiper blades, you will need to: – Lift the wiper arm away from the windshield. – Push the release tab on the wiper blade. – Pull the old wiper blade straight out of the wiper arm. – Slide the new wiper blade into the wiper arm. – Push down on the wiper arm until it snaps into place.

10. What are the safety precautions that should be taken when working on a wiper system?

When working on a wiper system, it is important to take the following safety precautions: – Disconnect the negative battery terminal to prevent electrical shock. – Wear gloves to protect your hands from cuts and abrasions. – Use a flashlight to see in dark areas. – Be aware of the moving parts of the wiper system and keep your hands clear of them.

Wipers are responsible for maintaining the cleanliness of commercial and residential buildings, as well as industrial and medical facilities. They typically perform a variety of tasks to ensure that the environment is clean, safe, and hygienic.

1. Cleaning Surfaces

Wipers are responsible for cleaning a variety of surfaces, including floors, walls, windows, and countertops. They typically use cleaning agents and disinfectants to remove dirt, dust, and other contaminants from these surfaces.

• Sweep, mop, and vacuum floors
• Dust and wipe down furniture, counters, and other surfaces

2. Emptying Trash

Wipers are responsible for emptying trash cans and bins. They typically remove trash from the building and dispose of it in a designated area.

• Empty trash cans and bins
• Take out the trash

3. Cleaning Bathrooms

Wipers are responsible for cleaning bathrooms. They typically clean toilets, sinks, showers, and floors. They may also be responsible for restocking bathroom supplies.

• Clean toilets, sinks, showers, and floors
• Restock bathroom supplies

4. Other Duties

Wipers may also be responsible for other duties, such as assisting with minor repairs, setting up for events, and moving furniture. They may also be required to work overtime or on holidays.

• Assist with minor repairs
• Set up for events
• Move furniture

Preparing for a wiper interview can be daunting, but with the right tips, you can increase your chances of success. Here are a few things to keep in mind:

1. Research the Company and Position

Take some time to learn about the company you’re applying to, as well as the specific wiper position. This will help you understand the company’s culture and the expectations for the role.

• Visit the company website
• Read online reviews of the company
• Talk to people who work at the company

2. Practice Answering Common Interview Questions

There are a number of common interview questions that you’re likely to be asked, such as “Why are you interested in this position?” and “What are your strengths and weaknesses?”. Take some time to practice answering these questions in a clear and concise way.

• Use the STAR method to answer interview questions
• Be specific and provide examples
• Practice your answers out loud

3. Dress Professionally

First impressions matter, so it’s important to dress professionally for your interview. This means wearing clean, pressed clothes that are appropriate for the workplace.

• Wear a suit or dress pants and a button-down shirt
• Make sure your clothes are clean and pressed
• Avoid wearing revealing or casual clothing

4. Be on Time

Punctuality is important, so make sure you arrive for your interview on time. If you’re running late, call or email the interviewer to let them know.

• Plan your route in advance
• Give yourself plenty of time to get to the interview
• Call or email the interviewer if you’re running late

5. Be Yourself

The most important thing is to be yourself during your interview. Don’t try to be someone you’re not, because the interviewer will be able to tell. Just be genuine and honest, and let your personality shine through.

• Be confident and assertive
• Make eye contact with the interviewer
• Be enthusiastic and passionate about the position